Windows XP SP3 X-TEAM Group SATA 2009 v5 | 698 MB
Description:
This assembly is built on the original image of Microsoft Windows XP Professional SP3 Russian version, with all the updates on April 24, 2009!
Decoration in the style of cat. New! WPI, now to decide what needs to be integrated into our operating system.
Checksums image:
CRC32: 40C55EB0
MD5: 4EF86DD826B180C0DA65160B1A5C9252
SHA-1: C08CD2DAC145BF18EDB3C8C3A7A49140CE490C73
Important:
Assembling released at the personal request of the author and do for themselves. Because of all of the software author is not responsible. Assembling the available “as is” and download on your own volition and at their own risk.
WARNING! This assembly provided to you solely for information purposes. All rights to specific products belong to their copyright holders. If you used the software of the assembly, it means that you are a holder of a license or remove these products after a trial period of use. For offenses relating to the unlicensed use of the product on the disc, by the assembly is not responsible.
System requirements:
Requires a PC equipped with a processor with a clock speed of 256 MHz or higher;
recommended a family of 300 MHz Intel Pentium / Celeron, AMD K6/Athlon/Duron family or compatible processor with them.
• Memory
The recommended amount of RAM – 512 MB or more (minimum allowable – 256 MB, while productivity may be limited and some features)
• Hard Drive
Requires 10 GB of free disk space (the used space on your hard drive depends on the configuration, for custom installation may require more or less disk space)
• Drive
A DVD-ROM drive
• Other Devices
Keyboard and mouse (Microsoft), or compatible pointing device
• Monitor resolution of 800/600 or higher
• Video Card – 32 MB
The Eee7 is a special version of Windows 7 Ultimate, based on the last edition 7264, made by the group “ModMyEee” and occupies only 1,49 GB USB drive and at 4 Gb hard disk. Operates on any netbook, the Eee PC 7 “4GB, until the last Sony Vaio P series and is faster and the XP SP3. No major operation has not been deducted. All networking capabilities remained intact. Hardware support is not removed.
Some of the things that have been removed:
Old drivers, games, Asian languages (can be added later), the help files, and more.
System Requirements:
Hard Drive 4GB
RAM 256mb (recommended 1GB)
CPU according to the netbook, 900 MHz +
File: Windows.7.x86.Build.7264.Netbook.Edition.iso
Size: 1 480 4275 20 bytes
MD5: 5EAEE9B6CBA905FF5691FD172F32E427
SHA1: 8B49F2A7A8DB22004985AD7E905435753545A82A
CRC32: 02404775
The above iSO file is not bootable from a USB Stick, to make it bootable from a USB Stick please follow the instructions below
Important Information:
* When installing Eee7, The final phase of installation (Finalizing Installation) could take some time depending on the netbook to have.
* If you do not have drivers for Vista to install the devices , then simply download the drivers for XP, go to the executable file (. Exe) that you downloaded, right click -> Properties — > Compatibility and check the option “Run this program in compatibility mode” for:
Windows XP (Service Pack 2)
To be able to install the netbook due to lack of dvd drive,we should prepare a USB Flash to make it bootable.
What we need:
* USB Flash Drive (2GB + more)
* The DVD which we burned the image of the iso that you downloaded
* A computer with Vista / Windows 7
Step 1: Formating the USB Flash
The following steps we will use the command prompt to create the appropriate Usb flash fomat with diskpart. [Note: It will erase all the data on USB Flash, be careful.]
1. Connect the USB Flash Drive
2. Open the command prompt as administrator (Go Start> All Programs> Accesories, right click on the “Command Prompt” and select “Run as administrator”
3. To find out what number corresponds to the USB Flash Drive you should type the following in the window of the “Command Prompt”:
diskpart
list disk
The number corresponding to your USB will be appear in the list (see the USB and the capacity of)
This number will need in the next step. Suppose that the USB Flash Drive is the disk 1.
4. Format the USB typing the following commands in the same window. Attention, replace the number “1″ on disk 1 to the number of your drive as emerged from the above list.
select disk 1
clean
create partition primary
select partition 1
active
format fs = NTFS
assign
exit
When you enter this, you will have a USB Flash Drive formatted ready to be bootable.
Step 2: Let’s make the USB bootable
we will use the application bootsect that is in the EEE7 DVD.
We will use the same command prompt window from Step 1:
1. Put the dvd of Eee7 in the drive of your computer.
2. Change the drive in the command prompt with that which is your drive. Suppose that the DVD drive is D:
d:
cd d: \ boot
3. We will use the bootsect to define the USB as a bootable NTFS drive ready to accept the Eee7.
Suppose that the USB Flash Drive is G: \, your position in G: \ put the letter of your USB.
Enter:
bootsect / nt60 g:
4. You can close the command prompt,now the USB is bootable.
Step 3: Copy files from DVD to USB Flash drive
The easiest way is through the windows. Copy all files from DVD and paste it in the USB flash drive. Just copy all the files, you’re ready.
Step 4: Set the BIOS to boot from USB
Windows Xp SP3 Revolution v3 BETA (32-BIT) | 526 MB
I don’t know if anyone remembers my XP editions called Revolution but I took a little break for a while cause I lost complete interest in updating my edition to be compatible with SP3, so many of my custom programs were incompatible, MCE edition was playing up and I was in the middle of creating a multi-boot DVD edition before SP3 came out, in the end I couldn’t be bothered.
But Since I left my job and broken my World of Warcraft addition I have had lots of time and thought I would start my Revolution edition again.
Since I deleted everything i have had to start from scratch again mostly so this version im calling a beta but to be honest it is near complete and I think its just a couple of windows updates and a few programs to be auto installed.
As i always say these editions of windows are for my own personal use and the programs that are installed reflect that, I don’t do as much video/audio/web development stuff any more so there is a lot less that will be included in this edition and future editions.
My main goals for Revolution are:
1: Be compatible and not to break any programs from working.
2: Be stable
3: Be quick and responsive
4: Less junk in the trunk.
I think I have achieved my goals but I will need your feedback to be sure as I do a lot of maintenance and reinstalls on my friends and family’s pc (yes you guys are my guinea pigs XD).
This Revolution Disk will install Windows XP Professional SP3 along with IE8, WMP11 and also Klite codec pack (Standard), It also includes Kels Run-times addon pack v5.4. Among those are also themes, icons, pointers, wallpapers and sounds to make it look and feel like Vista/Windows 7, these have all been repacked by myself, there is also an icon update program so when you update windows and icons are replaced with the defaults you can always get the vista icons back.
On the disk is a folder called software, I have included nero micro 8 (just click the bat file it will silently install) and allso 7zip is included along with jave, flash and doxnet 3.5), on the start menu is a program called filehippo that will help keep all installed programs upto date but it does require dot net to be installed.
I use a key that has been black listed so you wont be able to update windows from the website and the annoying wga tray thing will pop-up, to combat that I have included RemoveWGA.exe which is located on the cd in the software\misc folder (I haven’t tested it but I downloaded from softpedia.com), I haven’t had time to find a new hack or patch around this wga thing so if you know of one that is easy to include then message me. My own way of dealing with it is to deny everyone read write access to wgatray.exe and wgalogon.dll and then just let auto update do its job.
IMPORTANT
Once the installation has finished it does take a minute or two for windows to apply settings at first login, At welcome screen hold down ctrl+alt then press DEL x 2.
Username: Administrator
Password: Qwerty1
This install disk can’t be used to upgrade, you must do a clean install.
It will default to English UK, but you can change once it has been installed.